Prepare a sanitizing solution according to the instructions of your locally approved sanitizing product. For instance:
- fill a 5-litre container with ca. 4 litres hot water
- add 2 sanitizing tablets
Turn the mixer tray upside down and move the seal strip by pulling it by the strap. Slide the strip completely out of the mixer tray.
Turn the mixer tray around, and remove the hose cover by pulling each side out of its lock.
Remove the back panel of the tray pulling it upwards on the backside.
Pull the hoses to remove them from the mixer tray.
Dip coffee mixing tray and drink hoses in the sanitizing solution.
Let it soak for at least 20 minutes, but no longer then 12 hours.
Place the outlet hoses back into the mixing tray.
Place the cover on top of the hoses. Push the cover all the way down until it locks in place.
Turn the mixing tray around and place the seal strip in its openings.
Tear open the dosing tube opening, and unfold the dosing tube.
Check that the dosing tube is positioned straight and that the coloured ring on the tube covers the corresponding circle on the pack.
Open the dosing tube by turning it 90 degrees clockwise, check if the tube starts filling itself.
Place a 3-litre container on the drip tray.
Hot water will flow into the rinsing container. When ready, press ‘ENTER’ to continue.
Carefully remove and empty the rinsing container.
Open the door and push the ‘stand by’-button to disable the touchscreen. Then close the door.
Clean the exterior of the machine with a moist cloth.
Never spray directly onto the machine.
Open the door and push the ‘stand by’-button again, to enable the touchscreen. Then close the door.